Foam Coat, 2lbs
This is the best smooth foam coat we have tested. This rock-hard coating protects and beutifies your foam projects. Can be use outdoors when sealed with any outdoor paint. Just mix with water. Sandable. Apply thick with a trowell or thin to use with a paintbrush. Sets up in only about 15 minutes. Extend drying time by adding up to 50% latex paint with your water before mixing into the dry foam coat.2lbs. Covers 30 sq. ft at 1/16th" thick. (Less expensive than Rosco Foam Coat, and better characteristics)
MIXING Mix in a clean container with clean water. Use 3.5oz cool water per pound of powder. Add powder to water and mix until Foam Coat turns to a smooth paste. Do not overmix.
APPLYING Fill big cracks and holes by applying pasty mixture with a trowel. You may add more water until mixture is thin enought to apply with a paint brush, although thinning weakens coating. Use thinned mixture to texture large areas. May be applied as thick as 3/8 inch. Try texturing surface before coating sets. Add Grit texturizer to create a rock-like surface effect.
SET TIME Use within 10 minutes. Sets hard in 30 minutes. Maximum bond and hardness in 1 day.
FINISHING Remove dust before painting. This product goes on smooth and can be sanded. Can be used outdoors if sealed with paint.
CLEAN-UP Clean tools and brushes with clean soapy water before coating hardens.
- Item #: Foam Coat
